N74F112N,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Supplier Device Package | 16-DIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | JK Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 100MHz |
| Current - Quiescent (Iq) | 21mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 6.5ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| RoHS Status | ROHS3 Compliant |
N74F112N,602 Overview
The package is in the form of 16-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. It is configured with Differentialas an output. It is configured with a trigger that uses Negative Edge. Through Holeis positioned in the way of this electronic part. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis used in the operation. JK Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74Fseries FPGA. Its output frequency should not exceed 100MHz. There are 2 elements in it. As a result, it consumes 21mA quiescent current and is not affected by external forces.
N74F112N,602 Features
Tube package
74F series
N74F112N,602 Applications
There are a lot of Rochester Electronics, LLC N74F112N,602 Flip Flops applications.
- Frequency division
- ATE
- Control circuits
- Memory
- Test & Measurement
- CMOS Process
- Shift Registers
- Individual Asynchronous Resets
- Pattern generators
- Balanced 24 mA output drivers
