N74F174D,623
| Parameters | |
|---|---|
| Max Frequency@Nom-Sup | 80000000Hz |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 100MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 45mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.02 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 45mA |
| fmax-Min | 80 MHz |
N74F174D,623 Overview
16-SOIC (0.154, 3.90mm Width)is the way it is packaged. D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. 0°C~70°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74F series. Its output frequency should not exceed 100MHz. D latch consists of 1 elements. It consumes 45mA of quiescent Terminations are 16. The 74F174family includes it. A voltage of 5V is used as the power supply for this D latch. An electronic device belonging to the family F/FASTcan be found here. The part is included in FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch operates on 5V volts.
N74F174D,623 Features
Tape & Reel (TR) package
74F series
5V power supplies
N74F174D,623 Applications
There are a lot of NXP USA Inc. N74F174D,623 Flip Flops applications.
- Circuit Design
- Synchronous counter
- Pattern generators
- Asynchronous counter
- Frequency Divider circuits
- High Performance Logic for test systems
- Balanced 24 mA output drivers
- Single Down Count-Control Line
- EMI reduction circuitry
- Cold spare funcion
