N74F174N,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 100MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 45mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.02 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 45mA |
| fmax-Min | 80 MHz |
| Max Frequency@Nom-Sup | 80000000Hz |
| Height Seated (Max) | 4.2mm |
| RoHS Status | ROHS3 Compliant |
N74F174N,602 Overview
In the form of 16-DIP (0.300, 7.62mm), it has been packaged. D flip flop is embedded in the Tube package. This output is configured with Non-Inverted. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. The operating temperature is 0°C~70°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 74F series. You should not exceed 100MHzin the output frequency of the device. A total of 1elements are present in it. It consumes 45mA of quiescent current without being affected by external factors. It has been determined that there have been 16 terminations. The 74F174 family contains it. The D flip flop is powered by a voltage of 5V . Electronic devices of this type belong to the F/FASTfamily. The part you are looking for is included in FF/Latches. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. There are 5V power supplies attached to it.
N74F174N,602 Features
Tube package
74F series
5V power supplies
N74F174N,602 Applications
There are a lot of NXP USA Inc. N74F174N,602 Flip Flops applications.
- Common Clocks
- Circuit Design
- Set-reset capability
- Frequency Divider circuits
- Guaranteed simultaneous switching noise level
- Differential Individual
- Count Modes
- ATE
- Individual Asynchronous Resets
- Synchronous counter
