N74F175AN,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Clock Frequency | 160MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 31mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.02 A |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 9 ns |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
N74F175AN,602 Overview
The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). The package Tubecontains it. As configured, the output uses Differential. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis required for its operation. In the operating environment, the temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74F series. You should not exceed 160MHzin its output frequency. D latch consists of 1 elements. T flip flop consumes 31mA quiescent energy. Currently, there are 16 terminations. The 74F175 family contains this object. The power source is powered by 5V. It is a member of the F/FASTfamily of D flip flop. It is part of the FF/Latchesbase part number family. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). The power supply is 5V.
N74F175AN,602 Features
Tube package
74F series
5V power supplies
N74F175AN,602 Applications
There are a lot of NXP USA Inc. N74F175AN,602 Flip Flops applications.
- Memory
- Computers
- ESCC
- Guaranteed simultaneous switching noise level
- Consumer
- Data Synchronizers
- QML qualified product
- Modulo – n – counter
- Storage registers
- Synchronous counter
