N74F245D,623
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SO |
| Number of Pins | 20 |
| Packaging | Tape and Reel |
| Published | 2004 |
| JESD-609 Code | e4 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 9 ns |
| Family | F/FAST |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 7 ns |
| High Level Output Current | 24mA |
| Low Level Output Current | 3mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
N74F245D,623 Overview
Logical driver uses a neat SO package. Tape and Reel external packaging. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic part belongs to the F/FAST family of parts. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as 0°C. Digital buffer should operate with ambient temperature no higher than 70°C. Buffer driver outputs 3mA to its low level. In high level output mode, the electronic parts may conduct 24mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a BUS TRANSCEIVER logic IC. The fundamental operation of logical driver is based on 1 circuits.
N74F245D,623 Features
Bus Driver/Transceivers
High Level Output: 3mA
Low Level Output: 24mA
BUS TRANSCEIVER Logic IC
N74F245D,623 Applications
There are a lot of Nexperia N74F245D,623 Buffers & Transceivers applications.
- interconnection between computers
- Portable radio
- Wired telephone
- Changeing the frequency from IF to RF
- transmission relay
- Cell phones
- Car alarm systems
- Cordless telephone
- Precision geodetic measurement
- Wireless network systems
