N74F258AN,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F258 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | F/FAST |
| Number of Inputs | 2 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Output Polarity | INVERTED |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 9 ns |
| Propagation Delay (tpd) | 7 ns |
| Power Supply Current-Max (ICC) | 23mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 4.2mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
N74F258AN,602 Overview
For the purpose of saving board space, digital switch is included in the 16-DIP (0.300, 7.62mm).As a result, it is packaged in a way that is referred to as Tube.For mounting, digital switch ic uses the method Through Hole.In the multiplexers, the analog IC Multiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at 0°C~70°C.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74F series can be used in a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.You can also find related parts by using its logic switch base part number of 74F258.For multiplexer's system, a voltage of 5V is supplied.Signal switch has 16 component pins.I would like to refer to the logic switch as a member of the F/FAST family.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4.5V.It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.As a result, the turn signal switch consists of 1 outputs.The multiplexer provides 2 inputs.
N74F258AN,602 Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Power supplies of 5V
N74F258AN,602 Applications
There are a lot of NXP USA Inc. N74F258AN,602 Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Enabling block of memory depending on address in memory chips
- Robotic vehicles
- Automatic health monitoring systems
- High-performance memory systems
- Frequency multiplexing system
- CPU memory location identification
- Audio transmission
- LVDS
- Solenoid cooling fan
