N74F269N,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | TCO OUTPUT |
| Subcategory | Counters |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74F269 |
| Pin Count | 24 |
| JESD-30 Code | R-PDIP-T24 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | F/FAST |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.02 A |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Count Rate | 115MHz |
| Load/Preset Input | YES |
| Mode of Operation | SYNCHRONOUS |
| Height Seated (Max) | 4.7mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
N74F269N,602 Overview
The device is packaged in the 24-DIP (0.300, 7.62mm)type. In order to configure it, it uses 24terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. A wire connects the 1elements. A total of 24pins are available on all components. Tubeis the packaging method used for this package. In this case, it emerges as a member of the F/FAST family. Due to its membership in the 74Fseries, it is suitable for a variety of applications. In this case, the logic type is set to [0]. It is recommended to set the operating temperature to 0°C~70°C. It adopts a mounting type of Through Hole. It is able to operate with higher reliability when the supply voltage of 4.5V~5.5V is provided. The array contains elements that store 8bits each. This electronic device is equipped with the following features [0]. Under its base part number of [0], you will find additional related parts. In this case, there is 5V voltage coming from the voltage source. The minimum supply voltage (Vsup) is as low as 4.5V. There is 5.5V maximum supply voltage (Vsup) allowed. In this case, the electronic components belong to the family of [0].
N74F269N,602 Features
Embedded in the 24-DIP (0.300, 7.62mm) package
8 bits per element
TCO OUTPUT
N74F269N,602 Applications
There are a lot of NXP USA Inc. N74F269N,602 Counters & Dividers applications.
- Counter control/timers
- VHF, UHF, FM, AM, etc.
- Programmable decade counters
- TRUE RMS-TO-DC CONVERSION
- POWER COMPUTATION
- MULTIPLICATION
- Up Counters
- Divide-by-N counting
- Timing applications
- Clocks
