N74F298N,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F298 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Family | F/FAST |
| Number of Inputs | 2 |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.02 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Propagation Delay (tpd) | 9.5 ns |
| Power Supply Current-Max (ICC) | 40mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 4.2mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
N74F298N,602 Overview
It is included in the 16-DIP (0.300, 7.62mm) in order to save board space.As a result, it is packaged in a way that is referred to as Tube.The method digital switch ic adopts for mounting is Through Hole.the multiplexers uses an analog IC Multiplexer.By maintaining the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Several applications are possible for 74F series multiplexers.This configuration includes 16 terminations as part of its basic functionality.There is a base part number 74F298 that can be used to locate signal switch's related components as well.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has a total of 16 component pins.Among the family of F/FAST the logic switch is a member.In the signal multiplexer, there are 4 bits available.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4.5V.It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.Normally, 5V is powered by a battery.In this multiplexer, there is a total of 2 inputs.
N74F298N,602 Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Power supplies of 5V
N74F298N,602 Applications
There are a lot of NXP USA Inc. N74F298N,602 Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Frequency multiplexing system
- Audio transmission
- Medical industry
- Communication system
- Automatic Monitoring systems
- Enabling block of memory depending on address in memory chips
- Seven segment displays
- A/D converters
- Control unit of Central Processing unit (CPU)
