N74F373DB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F373 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | F/FAST |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 8 ns |
| Power Supply Current-Max (ICC) | 60mA |
| Independent Circuits | 1 |
| Delay Time - Propagation | 2ns |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
N74F373DB,118 Overview
The package in which it is embedded is named 20-SSOP (0.209, 5.30mm Width). As a result, it has a packaging of Tape & Reel (TR). It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. The way in which this electronic part is mounted is Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. It is 0°C~70°C at the operating temperature. An FPGA of this type belongs to the 74F series. There are 8 bits in this electronic part. This device has 20 terminations. The family it belongs to is 74F373. In order to operate it, the supply voltage must be 5V. The 20 pind are equipped with it. In terms of electronic devices, this one is in the F/FAST family. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. When Vsup reaches 5.5V, the maximal supply voltage is reached. A total of 5V power supplies are required for it to operate. There should be a voltage supply (Vsup) greater than 4.5V. Its reliable performance makes it an excellent choice for TAPE AND REEL. In order to operate properly, its maximum power current (ICC) should be 60mA.
N74F373DB,118 Features
20-SSOP (0.209, 5.30mm Width) package
74F series
8 Bits
74F373 family
20 pin count
5V power supplies
N74F373DB,118 Applications
There are a lot of NXP USA Inc. N74F373DB,118 Latches applications.
- Parallel Input
- Parallel data synchronization
- Relay
- Pattern generators
- Shift left register
- Serial Output Register
- Frequency dividing
- Control circuits
- Motor Drives
- TV Set-top Boxes
