banner_page

N74F373N,602

4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F373 20 Pins DUAL TTL 20-DIP (0.300, 7.62mm)


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-N74F373N,602
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 256
  • Description: 4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F373 20 Pins DUAL TTL 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Output Polarity TRUE
Max I(ol) 0.024 A
Prop. Delay@Nom-Sup 8 ns
Power Supply Current-Max (ICC) 60mA
Independent Circuits 1
Delay Time - Propagation 2ns
Height Seated (Max) 4.2mm
Length 26.73mm
Width 7.62mm
RoHS Status ROHS3 Compliant
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Surface Mount NO
Operating Temperature 0°C~70°C
Packaging Tube
Published 2013
Series 74F
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 74F373
Pin Count 20
JESD-30 Code R-PDIP-T20
Qualification Status Not Qualified
Output Type Tri-State
Circuit 8:8
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Family F/FAST
Output Characteristics 3-STATE
Current - Output High, Low 3mA 24mA
Logic Type D-Type Transparent Latch

N74F373N,602 Overview


The 20-DIP (0.300, 7.62mm) package contains it. It is packaged in the way of Tube. In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Mounting this electronic component follows the Through Hole method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of 0°C~70°C is used for operation. The 74F series of FPGAs is the one this FPGA belongs to. An electronic part with 8 bits is designed. A device such as this has 20 terminations designed. It is a member of the 74F373 family. The supply voltage of the device is 5V. 20 pins are available on it. It is a member of the F/FAST family of electronic devices. As far as ports are concerned, this device has 2 ports. This part can be found within the FF/Latches subcategory. Vsup reaches 5.5V as the maximum supply voltage. There are 5V power supplies attached to it. There should be a voltage supply (Vsup) greater than 4.5V. A maximal power current (ICC) is generated for its operation at 60mA.

N74F373N,602 Features


20-DIP (0.300, 7.62mm) package
74F series
8 Bits
74F373 family
20 pin count
5V power supplies

N74F373N,602 Applications


There are a lot of NXP USA Inc. N74F373N,602 Latches applications.

  • Automatic test equipment
  • Motor Drives
  • Multi-line decoders
  • Timers
  • Shift left register
  • Sample and hold register
  • Pseudo-random code generators
  • Serial Input
  • Programmable binary
  • Automotive Body Electronics

Write a review

Note: HTML is not translated!
    Bad           Good