N74F574N,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | BROADSIDE VERSION OF 374; POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F574 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 180MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 65mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 70mA |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
N74F574N,602 Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. JK flip flop uses Positive Edgeas the trigger. Through Holeis positioned in the way of this electronic part. A 4.5V~5.5Vsupply voltage is required for it to operate. 0°C~70°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74Fseries of FPGAs. Its output frequency should not exceed 180MHz Hz. D latch consists of 1 elements. It consumes 65mA of quiescent current without being affected by external factors. A total of 20 terminations have been made. Members of the 74F574family make up this object. The power supply voltage is 5V. This D flip flop belongs to the family of F/FAST. It is part of the FF/Latchesbase part number family. There is a 5.5Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 4.5V. The D latch runs on a voltage of 5V volts. The D flip flop has no ports embedded. In addition, you can refer to the additinal BROADSIDE VERSION OF 374; POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION of the D latch.
N74F574N,602 Features
Tube package
74F series
5V power supplies
N74F574N,602 Applications
There are a lot of NXP USA Inc. N74F574N,602 Flip Flops applications.
- Divide a clock signal by 2 or 4
- Bus hold
- Asynchronous counter
- Data Synchronizers
- Memory
- Common Clocks
- Buffer registers
- Instrumentation
- Safety Clamp
- High Performance Logic for test systems
