N74F579N,602
| Parameters | |
|---|---|
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Count Rate | 115MHz |
| Timing | Synchronous |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT; MULTIPLEXED I/O |
| Subcategory | Counters |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74F579 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Reset | Asynchronous |
| Family | F/FAST |
| Direction | Up, Down |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Max I(ol) | 0.024 A |
N74F579N,602 Overview
In the 20-DIP (0.300, 7.62mm)package, it is supplied. There are 20 terminations used for its configuration. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. A wire connects the 1elements. The number of all component pins is 20. It is packaged in the way of Tube. It is a member of the family [0]. Due to its membership in the 74Fseries, it is suitable for a variety of applications. The logic type of Binary Counter is adopted. In this case, the operating temperature should be set to 0°C~70°C. It adopts a mounting type of Through Hole. By providing the supply voltage of [0], it is capable of operating more reliably. It contains 8elements. In terms of this electronic device, the features provided by TCO OUTPUT; MULTIPLEXED I/Oare of the utmost importance. Further related parts may be found under the base part number 74F579. As a result of the voltage source, there is 5V voltage. The minimum supply voltage (Vsup) is as low as 4.5V. Depending on the device type, the maximum supply voltage (Vsup) can be up to 5.5V volts. This part is from the family [0].
N74F579N,602 Features
Embedded in the 20-DIP (0.300, 7.62mm) package
8 bits per element
TCO OUTPUT; MULTIPLEXED I/O
N74F579N,602 Applications
There are a lot of NXP USA Inc. N74F579N,602 Counters & Dividers applications.
- Frequency dividers
- Time Out Timer for Consumer-Application Industrial Controls
- VHF, UHF, FM, AM, etc.
- POWER COMPUTATION
- Time delay circuits
- Dual Up Counters
- Fixed or Programmable Frequency Division
- Communications Digital Frequency Synthesizers;
- Control counters
- Signal gating
