N74F74N,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 125MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
N74F74N,602 Overview
The flip flop is packaged in 14-DIP (0.300, 7.62mm). You can find it in the Tubepackage. T flip flop uses Differentialas the output. There is a trigger configured with Positive Edge. Through Holeis occupied by this electronic component. A 4.5V~5.5Vsupply voltage is required for it to operate. 0°C~70°C TAis the operating temperature. D-Typeis the type of this D latch. The 74Fseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 125MHz. There are 2 elements in it. As a result, it consumes 16mA quiescent current and is not affected by external forces. A total of 14 terminations have been made. The object belongs to the 74F74 family. It is powered from a supply voltage of 5V. The electronic device belongs to the F/FASTfamily. The part is included in FF/Latches. Vsup reaches its maximum value at 5.5V. It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. It operates from 5V power supplies.
N74F74N,602 Features
Tube package
74F series
5V power supplies
N74F74N,602 Applications
There are a lot of NXP USA Inc. N74F74N,602 Flip Flops applications.
- Latch
- Memory
- Pattern generators
- Counters
- QML qualified product
- Consumer
- Computers
- Buffer registers
- Patented noise
- Data storage
