N74F821D,623
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F821 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 180MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 105mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 9.5 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
N74F821D,623 Overview
24-SOIC (0.295, 7.50mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis used in the operation. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74F series. It should not exceed 180MHzin its output frequency. A total of 1elements are present in it. As a result, it consumes 105mA quiescent current. A total of 24terminations have been recorded. You can search similar parts based on 74F821. Power is provided by a 5V supply. In this case, the D flip flop belongs to the F/FASTfamily. This part is included in FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. A power supply of 5Vis required to operate it. There are 2 ports embedded in the flip flops. As an additional reference, you may refer to electronic flip flop POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION.
N74F821D,623 Features
Tape & Reel (TR) package
74F series
5V power supplies
N74F821D,623 Applications
There are a lot of NXP USA Inc. N74F821D,623 Flip Flops applications.
- Convert a momentary switch to a toggle switch
- 2 – Bit synchronous counter
- Frequency Divider circuits
- Shift Registers
- Divide a clock signal by 2 or 4
- Reduced system switching noise
- Data transfer
- Test & Measurement
- Buffered Clock
- Bus hold
