N80C188-25
| Parameters | |
|---|---|
| Additional Feature | DRAM REFRESH CONTROL UNIT; PROGRAMMABLE INTERRUPT CONTROLLER |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 125mA |
| Bit Size | 16 |
| Frequency (Max) | 25MHz |
| Data Bus Width | 16b |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Number of External Interrupts | 5 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 4.572mm |
| Length | 24.2062mm |
| RoHS Status | RoHS Compliant |
| Package / Case | PLCC |
| Surface Mount | YES |
| Number of Pins | 68 |
| JESD-609 Code | e0 |
| Number of Terminations | 68 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
N80C188-25 Overview
Due to its PLCC packaging, it is convenient to ship overseas. There is MICROPROCESSOR MICROPROCESSOR in the uPs, uCs, or peripheral ICs categories. In total, 68 terminations have been made. A 5V voltage supply should be used to turn on and run the cpu microprocessor. A 16-Bit architecture is used. For information about 68 pins, please refer to the datasheet. With a maximum supply current of 5.5V, it has a maximum power consumption. Microprocessors is a typical embedded microprocessor. The bandwidth required to transfer data is 16b. Using the microprocessor in an environment above 70°C is not recommended. Injecting pins into the embedded microprocessor body results in 68 pins. It is expected that the CPU will reach a top frequency of 25MHz. The micro processor requires 5V power supplies according to the datasheets. CPU voltages cannot exceed 125mA. Be sure to check out the additional features of the microprocessor, including: DRAM REFRESH CONTROL UNIT; PROGRAMMABLE INTERRUPT CONTROLLER. For hardware interrupts, there are 5 external interrupt terminations. In DMA (Direct Memory Access), 2 channels are applied.
N80C188-25 Features
16-Bit Structure
16b-Bit Data Bus Width
N80C188-25 Applications
There are a lot of AMD N80C188-25 Microprocessor applications.
- Magnetic resonance imaging (MRI)
- Washing machine
- Computer/laptop
- Mice
- Teletext terminals
- Walkie talkies
- Fire alarms
- Multi-meter
- Set-top boxes
- Fire detection & safety devices
