banner_page

N80C188EA25

1.27mm 16-bit Microprocessor 68-Pin 25MHz 5V PLCC


  • Manufacturer: Intel
  • Nocochips NO: 386-N80C188EA25
  • Package: PLCC
  • Datasheet: PDF
  • Stock: 662
  • Description: 1.27mm 16-bit Microprocessor 68-Pin 25MHz 5V PLCC (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case PLCC
Number of Pins 68
Packaging Bulk
Number of Terminations 68
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Technology CMOS
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) NOT SPECIFIED
Supply Voltage 5V
Terminal Pitch 1.27mm
Frequency 25MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 68
Qualification Status Not Qualified
Operating Supply Voltage 5V
Temperature Grade COMMERCIAL
Voltage 5V
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
uPs/uCs/Peripheral ICs Type MICROPROCESSOR
Supply Current-Max 105mA
Bit Size 16
Access Time 25 μs
Address Bus Width 20
Boundary Scan NO
Low Power Mode YES
External Data Bus Width 8
Format FIXED POINT
Integrated Cache NO
Number of External Interrupts 5
Number of DMA Channels 2
Height Seated (Max) 4.83mm
Length 24.2316mm
Width 24.2316mm
RoHS Status Non-RoHS Compliant

N80C188EA25 Overview


Shipping overseas is convenient since the embedded microprocessor is packed in PLCC. High reliability can be achieved by using the advanced packaging method Bulk. The type MICROPROCESSOR belongs to uPs/uCs/Peripheral ICs. As a whole, there are 68 terminations. With a 5V voltage supply, the part should be turned on and run. It has a 16-Bit architecture. 25MHz is the frequency of the CPU. Please refer to the datasheets for 68 pins functions. The CPU's external data bus width is 8. Temperatures above 70°C should not allow the embedded microprocessor to operate. The CPU microprocessor body is injected with 68 pins. In many applications, this CPU is mounted with a Surface Mount bus. In this case, 5V is the starting point. There is 5V voltage present in the CPU core. CPU voltage can't be higher than 105mA. The embedded microprocessor should not be supplied with a voltage higher than 5.5V. CPU microprocessors should be fed with 4.5V voltage. There're 5 external interrupts terminations to deal with hardware interrupts. The Direct Memory Access (DMA) process is programmed with 2 channels.

N80C188EA25 Features


16-Bit Structure

N80C188EA25 Applications


There are a lot of Intel N80C188EA25 Microprocessor applications.

  • Washing machines
  • Gas monitoring systems
  • Medical instruments chromatographs
  • Radio
  • Calculators
  • Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
  • Fax machines
  • Virtual reality VR robots
  • Oil and gas
  • Metering & measurement field

Write a review

Note: HTML is not translated!
    Bad           Good