N80C188XL25
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Number of Terminations | 68 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 25MHz |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 100mA |
| Bit Size | 16 |
| Access Time | 25 μs |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Number of External Interrupts | 5 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 4.83mm |
| Length | 24.2316mm |
| Width | 24.2316mm |
| RoHS Status | Non-RoHS Compliant |
N80C188XL25 Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in PLCC. Using advanced packaging techniques Bulk, high reliability is ensured. uPs/uCs/Peripheral ICs are a MICROPROCESSOR. There are 68 terminations totally. When the voltage supply is 5V, the cpu microprocessor should be powered on and run. It is an architecture with 16 bits. A 25MHz frequency is used by the CPU. You can find information about the functions of 68 pins in the datasheets. Microprocessors is a typical embedded microprocessor. This CPU has a wide external data Bus width of 8. Using the microprocessor in an environment above 70°C is not recommended. There are 68 pins injected into the embedded microprocessor body. This CPU is widely used in a variety of applications with its Surface Mount mounting. There is a 5V function for the micro processor. According to the datasheet, the embedded microprocessor requires 5V power supply. There is 5V voltage at the CPU core. Voltage can't exceed 100mA to the CPU. In a normal situation, users should not supply the CPU microprocessor with a voltage higher than 5.5V. It is recommended that the lowest voltage be fed to the micro processor is 4.5V. Don’t miss additional features of the embedded microprocessor such as: DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS. To deal with hardware interrupts, 5 external interrupt terminations occur. For the DMA (Direct Memory Access) process, 2 channels are used.
N80C188XL25 Features
16-Bit Structure
N80C188XL25 Applications
There are a lot of Intel N80C188XL25 Microprocessor applications.
- Scanners
- Answering machines
- Calculator
- Washing machines
- Glucose monitoring systems (for Type 1 Diabetes)
- Automobile
- Missile control
- Virtual reality VR robots
- Heart rate monitors
- Industrial instrumentation devices
