banner_page

NA555DG4

5V 555 Type, Timer/Oscillator (Single) Programmable Timers NA555 8 Pins 100kHz 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-NA555DG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 353
  • Description: 5V 555 Type, Timer/Oscillator (Single) Programmable Timers NA555 8 Pins 100kHz 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~105°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type 555 Type, Timer/Oscillator (Single)
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Analog Waveform Generation Functions
Technology BIPOLAR
Voltage - Supply 4.5V~16V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Frequency 100kHz
Base Part Number NA555
Pin Count 8
Supply Voltage-Min (Vsup) 4.5V
Operating Supply Current 10mA
Nominal Supply Current 3mA
Quiescent Current 15mA
Number of Timers/Counters 1
High Level Output Current -200mA
Low Level Output Current 200mA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NA555DG4 Overview


It is enclosed in the 8-SOIC (0.154, 3.90mm Width) packaging along with the digital timer. Ensure that the programmable timer's frequency is set to 100kHz.It is used to pack in Tube case. It is recommended to mount the device as type Surface Mount.The programmable timer can supply a voltage of 4.5V~16V. The type of chips can be divided into 555 Type, Timer/Oscillator (Single). The operating temperature of this timer clock is -40°C~105°C. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 10mA voltage. It is based on NA555. The timer clock contains 8 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 8 . The number of the chip's terminations sums up to 8. Its subcategory belongs to Analog Waveform Generation Functions. The timer clock has 72.603129mg in weight. The timer clock runs quiescent current at 15mA. The number of Timers/Counters on the device is 1.

NA555DG4 Features


Operate frequency at 100kHz
Package / Case: Tube
Mounting Type:Surface Mount
Quiescent Current at 15mA
1 Timers/Counters

NA555DG4 Applications


There are a lot of Texas Instruments NA555DG4 Programmable Timers & Oscillators applications.

  • Remote Sensors
  • Power-Gating Applications
  • Energy Harvesting Systems
  • Tamper Detection
  • White Goods
  • Low-Power Wireless
  • Battery Powered Systems
  • Car Door Handle circuit
  • Smart Key
  • Electric Vehicles

Write a review

Note: HTML is not translated!
    Bad           Good