NB100LVEP56DTR2
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100LVEP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±2.375V~3.8V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100LVEP56 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Circuit | 2 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -3.3/-5V |
| Number of Circuits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 650 ps |
| Quiescent Current | 45mA |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 4 |
| Supply Type | Dual |
| Prop. Delay@Nom-Sup | 0.7 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 65mA |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
NB100LVEP56DTR2 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 20-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC Differential Digital Multiplexer is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of ±2.375V~3.8V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 100LVEP series, which provide extensive application potential.There is a design for terminating 20 as part of its basic configuration.As its base part number is 100LVEP56, logic switch can also be used to find its related parts.In multiplexer's system, 2.5V is the voltage supplied.This turn signal switch contains 20 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a supply type of Dual employed as part of this supply.There are 20 pins on it.The mounting is in the way of Surface Mount.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.During mux switch's normal operation, -3.3/-5V is provided with a power supply.As part of the operation of this turn signal switch, there are 1 outputs.The digital switch ic is an electronic part classified into Multiplexer/Demultiplexers.In the absence of external influences, it consumes 45mA current of multiplexer ic.It has 4 inputs.The switches package is packaged in accordance with TAPE AND REEL.It is necessary for the digitalswitch to operate normally that 2 circuits be formed.
NB100LVEP56DTR2 Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
Power supplies of -3.3/-5V
NB100LVEP56DTR2 Applications
There are a lot of ON Semiconductor NB100LVEP56DTR2 Signal Switches / Multiplexers / Decoders applications.
- Small scale TV wall
- Enabling block of memory depending on address in memory chips
- Make full adder
- Code conversion
- Textile mills
- Make half adder
- Frequency multiplexing system
- CPU memory location identification
- Memory system of computers
- A robotic vehicle with the metal detector
