Parameters |
Mounting Type |
Surface Mount |
Package / Case |
24-VFQFN Exposed Pad |
Surface Mount |
YES |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
100LVEP |
JESD-609 Code |
e0 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
24 |
Type |
Differential Digital Multiplexer |
Terminal Finish |
TIN LEAD |
Additional Feature |
NECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V |
Technology |
ECL |
Voltage - Supply |
±2.375V~3.8V |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
24 |
JESD-30 Code |
S-XQCC-N24 |
Number of Outputs |
1 |
Qualification Status |
COMMERCIAL |
Circuit |
2 x 2:1 |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
2.375V |
Number of Inputs |
2 |
Output Polarity |
COMPLEMENTARY |
Propagation Delay (tpd) |
0.65 ns |
Voltage Supply Source |
Dual Supply |
Independent Circuits |
1 |
Length |
4mm |
Width |
4mm |
RoHS Status |
Non-RoHS Compliant |
NB100LVEP56MN Overview
As a means of saving space, digital switch is provided in the 24-VFQFN Exposed Pad.As a result, it is packaged in the way of Tube.The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses an analog IC Differential Digital Multiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a ±2.375V~3.8V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers from 100LVEP series can be used for a wide range of applications.There is a design for terminating 24 as part of its basic configuration.The multiplexer is supplied with 2.5V voltage.This turn signal switch contains 24 component pins.At the end of a conductor, it uses NO LEAD as the point where the conductor ends.Vsup should be kept at 2.375V to prevent some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 5.5V.As a result, the turn signal switch consists of 1 outputs.A multiplexer such as this has 2 inputs available.Additionally, NECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V has improved characteristics.
NB100LVEP56MN Features
Supplied in the 24-VFQFN Exposed Pad package
NECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V
NB100LVEP56MN Applications
There are a lot of Rochester Electronics, LLC NB100LVEP56MN Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Data demultiplexing
- Robotic vehicles
- War field flying robot with a night vision flying camera
- Combinational circuit
- Arithmetic Logic Units
- Transmission from the computer system of a satellite
- Paper plants
- Recording transmission
- Medium scale TV wall