NB100LVEP56MN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100LVEP |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Differential Digital Multiplexer |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±2.375V~3.8V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100LVEP56 |
| Pin Count | 24 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 2 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -3.3/-5V |
| Number of Circuits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 650 ps |
| Quiescent Current | 45mA |
| Logic Function | Mux |
| Number of Inputs | 4 |
| Supply Type | Dual |
| Prop. Delay@Nom-Sup | 0.7 ns |
| Power Supply Current-Max (ICC) | 65mA |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NB100LVEP56MN Overview
Due to the fact that it is provided in the 24-VFQFN Exposed Pad, digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Differential Digital Multiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a ±2.375V~3.8V supply voltage.Multiplexers of the 100LVEP series can be used in a wide range of applications.This configuration includes 24 terminations as part of its basic functionality.There is a base part number of 100LVEP56 which can also be used in order to locate the logic switch that are related to this item.The turn signal switch is supplied with a voltage of 2.5V volts.In this turn signal switch, there are 24 component pins.It employs NO LEAD as the point at which conductors come to an end.There is a type of supply of Dual.This multiplexer ic is configured with 24 pins.The mount is in Surface Mount.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.The power supply of -3.3/-5V is provided for mux switch's normal operation.In order for the turn signal switch to work, there are 1 outputs.The part belongs to the Multiplexer/Demultiplexers category of signal switches.In the absence of external influences, it consumes 45mA current of multiplexer ic.The multiplexer is equipped with 4 inputs.The switches is packaged according to the way of RAIL.To operate the digitalswitch normally, 2 circuits are formed.
NB100LVEP56MN Features
Supplied in the 24-VFQFN Exposed Pad package
Adopting a supply type of Dual
Power supplies of -3.3/-5V
NB100LVEP56MN Applications
There are a lot of ON Semiconductor NB100LVEP56MN Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor input
- Make full adder
- RF-based home automation system
- Solenoid cooling fan
- Video transmission
- Robotic vehicles
- A/D converters
- Relay
- Speed control of medern motors
- High-performance memory-decoding applications
