NB100LVEP56MNR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-TFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 100LVEP |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | TIN LEAD |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | ±2.375V~3.8V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| JESD-30 Code | S-XQCC-N24 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Circuit | 2 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Number of Inputs | 2 |
| Output Polarity | COMPLEMENTARY |
| Propagation Delay (tpd) | 0.65 ns |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
NB100LVEP56MNR2 Overview
Due to the fact that it is provided in the 24-TFQFN Exposed Pad, digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Differential Digital Multiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of ±2.375V~3.8V.provides digital controlled switch's digital controlled switch'sIn addition to being a member of the 100LVEP series, these multiplexers have a wide range of applications.Among its basic features are 24 terminations.For multiplexer's system, a voltage of 2.5V is supplied.In this turn signal switch, there are 24 component pins.NO LEAD represents the end of conductors.To avoid unnecessary failures, keep the supply voltage at 2.375V (Vsup).Avoid unnecessary failures by keeping Vsup at 5.5V.As part of the operation of this turn signal switch, there are 1 outputs.This multiplexer provides 2 inputs.Additionally, NECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V provides improved characteristics.
NB100LVEP56MNR2 Features
Supplied in the 24-TFQFN Exposed Pad package
NECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V
NB100LVEP56MNR2 Applications
There are a lot of Rochester Electronics, LLC NB100LVEP56MNR2 Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Speed synchronization of multiple motors in industries
- Used to connect a single source to multiple destinations
- Electronic circuits
- Recording transmission
- HD surveillance system
- Robotic vehicles
- High-performance memory-decoding applications
- Idle motor
- HDMI applications
