banner_page

NB2305AI1DTR2G

3.3V Zero Delay Buffer 133MHz NB2305A Clock Generators 8 Pins 8-TSSOP (0.173, 4.40mm Width) 8 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NB2305AI1DTR2G
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 829
  • Description: 3.3V Zero Delay Buffer 133MHz NB2305A Clock Generators 8 Pins 8-TSSOP (0.173, 4.40mm Width) 8 Terminals Surface Mount 3V~3.6V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number NB2305A
Pin Count 8
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Nominal Supply Current 50mA
Frequency (Max) 133MHz
Halogen Free Halogen Free
Input CMOS
Ratio - Input:Output 1:5
PLL Yes
Differential - Input:Output No/No
Same Edge Skew-Max (tskwd) 0.25 ns
Number of True Outputs 4
Length 4.4mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2008
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
Type Zero Delay Buffer
Terminal Finish Tin (Sn)
Subcategory Clock Drivers
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1

NB2305AI1DTR2G Overview


This clock IC is packaged using the Tape & Reel (TR) method. Embedded in the 8-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As you can see, it consists of 8 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. A clock generator's input is called CMOS and it is designed as the input for this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. An upper frequency limit of 133MHz Max can be achieved with this clock-based frequency synthesizer. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximum voltage this clock PLL can handle is 3.6V. For safety reasons, this frequency generator's supply voltage should remain above 3V. Clock generator ic works with 3V~3.6V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. A Zero Delay Buffer is a classification for the electronic part in question. The clock-generating IC is a 8-bit device designed specifically for microprocessors. This part number is related to its related electronic parts. A 8 pin is available on the PLL. RF synthesizers can handle voltages up to 3.3V. As a result, it is commonly classified as a type of Clock Drivers clock PLL. There is a low timing skew at 0.25 nsmax with this RF synthesizer. There are 4 pins that are configured to enable high true output on this analog clock generator.

NB2305AI1DTR2G Features


Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs

NB2305AI1DTR2G Applications


There are a lot of ON Semiconductor NB2305AI1DTR2G Clock Generators applications.

  • High-frequency induction heating
  • Main oscillator in receiver
  • Cellular/4G
  • CPUs
  • Automatic control system test
  • Phase modulation cellular systems
  • Local oscillators (LOs)
  • Clock generation systems
  • Bit synchronization
  • Computers to manage memory cards

Write a review

Note: HTML is not translated!
    Bad           Good