banner_page

NB2308AI2HDG

3.3V Zero Delay Buffer 133.3MHz NB2308A Clock Generators 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 3V~3.6V Tube


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NB2308AI2HDG
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 291
  • Description: 3.3V Zero Delay Buffer 133.3MHz NB2308A Clock Generators 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 3V~3.6V Tube (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Zero Delay Buffer
Terminal Finish Tin (Sn)
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V
Base Part Number NB2308A
Pin Count 16
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Frequency (Max) 133.3MHz
Output Characteristics 3-STATE
Halogen Free Halogen Free
Input Clock
Ratio - Input:Output 1:8
Max I(ol) 0.008 A
PLL Yes with Bypass
Differential - Input:Output No/No
Divider/Multiplier Yes/Yes
Same Edge Skew-Max (tskwd) 0.2 ns
Number of True Outputs 8
Length 9.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

NB2308AI2HDG Overview


As a clock IC, it uses the Tube package. Clock PLL is embedded in the 16-SOIC (0.154, 3.90mm Width) package. There are 16 terminations found in the file. The clock generator ic should be grounded with a voltage of 3.3V. In this case, Clock is designed to be the input of the clock generator. 1 circuits are implemented to access the electronic component's full performance. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.3MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would be possible to supply this clock PLL with 3.6V of power. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. This electronic component can be classified into Zero Delay Buffer. It is a 16-bit IC that is designed for microprocessors specifically. According to the base part number NB2308A, its related parts can be found. It is possible to connect to the frequency generators via 16 pins. Time clock generator is capable of handling a voltage of 3.3V. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns. The clock generator is configured with 8 pins for enabling true outputs.

NB2308AI2HDG Features


Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs

NB2308AI2HDG Applications


There are a lot of ON Semiconductor NB2308AI2HDG Clock Generators applications.

  • Electronic countermeasures
  • Radar
  • Melting
  • Peripheral devices
  • Wireless handsets
  • Wireless base station for LTE, LTE-advanced
  • Multiplexing communication
  • Cell phones
  • MRI
  • Clock recovery

Write a review

Note: HTML is not translated!
    Bad           Good