NB2309AI1DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Zero Delay Buffer |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NB2309A |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 50mA |
| Frequency (Max) | 133.33MHz |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Input | Clock |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NB2309AI1DG Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. Clock PLL is embedded in the 16-SOIC (0.154, 3.90mm Width) package. This clock generator will sustain a maximum temperature of 260 when reflown. It contains 16 terminations that can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. For full access to the electronic component's capabilities, 1 circuits are implemented. It provides a maximum frequency of 133.33MHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. 3.6V would be the maximum supply voltage for this clock generator. For safety reasons, this frequency generator's supply voltage should remain above 3V. There should be 3V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. This electronic component can be classified into Zero Delay Buffer. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. NB2309A is the base part number for finding related electronic parts. There is a 16 pin that is available on the frequency synthesizers. RF synthesizers can handle a voltage of 3.3V as the supply voltage. The output frequency can be amplified as high as possible with its 9 signal outputs. At 0.25 ns Max, this analog clock generator exhibits low timing skew. At frequencies of 133MHz, RF synthesizer achieves high efficiency.
NB2309AI1DG Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
NB2309AI1DG Applications
There are a lot of ON Semiconductor NB2309AI1DG Clock Generators applications.
- Mixed mode (analog and digital) applications
- Notebooks
- Integrated phase noise in aerospace systems
- Fiber Channel
- DVD recorders
- Signal generator
- Ports
- Instrument
- Laptops
- Digital HDTV systems
