NB2309AI1HDTG
| Parameters | |
|---|---|
| Frequency (Max) | 133.33MHz |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Input | Clock |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NB2309A |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 50mA |
NB2309AI1HDTG Overview
The Tube method is used for packaging clock ICs. Clock PLL is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains 16 terminations that can be found in frequency synthesizer. The supply voltage of 3.3V allows for high efficiency. This clock generator receives its inputs from Clock, which is designed to be the clock source. There are 1 circuits implemented in order to achieve full performance from this electronic part. An upper frequency limit of 133.33MHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Clock generators can take up to 3.6V of power as a maximum supply voltageIn order to maintain safety, this frequency generator should be supplied with voltages above 3V. Clock generator ic works with 3V~3.6V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As far as electrical parts go, this component can be classified as a Zero Delay Buffer component. Clock PLL is equipped with 16 pin count. The related electrical components for the base part number NB2309A can be found below. There are 16 pins that are available on the frequency generator. This time clock generator can handle a voltage of 3.3V as its supply voltage. The output frequency can be amplified as high as possible with its 9 signal outputs. Low timing skew is provided by this analog clock generator at maximum 0.25 ns. At frequencies of 133MHz, RF synthesizer achieves high efficiency.
NB2309AI1HDTG Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
NB2309AI1HDTG Applications
There are a lot of ON Semiconductor NB2309AI1HDTG Clock Generators applications.
- FM demodulation networks for FM operations
- Closed circuit systems
- Wireless infrastructure
- Multiplexing communication
- PMR (Professional Mobile Radio)
- Precision auxiliary angle deflection measurement
- Antenna automatic tracking
- Digital circuits
- FMCW Radar
- GPS systems
