NB2769ASNR2G
| Parameters | |
|---|---|
| Lifecycle Status | CONSULT SALES OFFICE (Last Updated: 19 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE AT 2.5V SUPPLY |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.375V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NB2769A |
| Output | CMOS |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Frequency (Max) | 13MHz |
| Input | CMOS, Crystal |
| Ratio - Input:Output | 1:1 |
| Primary Clock/Crystal Frequency-Nom | 13MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Length | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NB2769ASNR2G Overview
The Tape & Reel (TR) method is used for packaging clock ICs. A Clock PLL is included with the SOT-23-6 Thin, TSOT-23-6 package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains 6 terminations that can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This clock generator receives its inputs from CMOS, Crystal, which is designed to be the clock source. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 13MHz, this clock-based RF synthesizer is suitable for a variety of applications. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As long as you provide 2.375V~3.6V supply voltage, it will work. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of CMOS logic. This electronic component is usually classified as a Clock/Frequency Synthesizer component. In this IC, a 6-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. There is a 6 pin that is available on the digital clock generator. The supply voltage should be maintained at 3.3V for high efficiency. Clock generator can also be included into Clock Generators. There is a CAN ALSO OPERATE AT 2.5V SUPPLY feature on this frequency generator in order to produce a better clock signal.
NB2769ASNR2G Features
Available in the SOT-23-6 Thin, TSOT-23-6
Supply voltage of 3.3V
Operating supply voltage of 3.3V
NB2769ASNR2G Applications
There are a lot of ON Semiconductor NB2769ASNR2G Clock Generators applications.
- Signal modulation and demodulation
- Integrated phase noise in aerospace systems
- Signal generator
- Communication infrastructure
- Antenna automatic tracking
- Infotainment systems
- Mechanical devices
- Microwave backhaul IF
- Microwave radio
- High-frequency induction heating
