NB3N1200KMNG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 15 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Weight | 206.29948mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Tin (Sn) |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 133MHz |
| Base Part Number | NB3N1200 |
| Output | HCSL |
| Number of Outputs | 12 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Number of Circuits | 1 |
| Operating Supply Current | 330mA |
| Nominal Supply Current | 330mA |
| Propagation Delay | 100 ps |
| Quiescent Current | 330mA |
| Family | NB3 |
| Logic Function | Buffer |
| Input | Clock |
| Ratio - Input:Output | 1:12 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Max Duty Cycle | 55 % |
| Divider/Multiplier | No/No |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Schmitt Trigger Input | No |
| Height | 950μm |
| Length | 9mm |
| Width | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NB3N1200KMNG Overview
As a clock IC, it is packaged by the Tray method. 64-VFQFN Exposed Pad contains this Clock PLL. As a result, frequency synthesizers can be found to contain 64 terminations. The supply voltage of 3.3V allows for high efficiency. This Clock PLL will be fed by Clock as its input. It is possible to access the full performance of the electrical part by implementing 1 circuits. Because of the Surface Mount, clock PLL can be easily mounted on the panel. It would be possible to supply this clock PLL with 3.465V of power. As long as you provide 3.135V~3.465V supply voltage, it will work. Based on test statistics, ambient temperature should be set at 0°C~70°C. HCSL logic levels are supported by this RF synthesizer. This part number is related to its related electronic parts. There are 64 pins that are available on the clock PLL. Supply voltage 3.3V is what clock generator can handle. Clock PLL is facilitated with 12 signal outputs to magnify output frequency as high as possible. The timing skew of this frequency synthesizer is low at 0.05 nsmax. By searching for parts that belong to the NB3 family, you can find electronic parts that are similar. By operating at a frequency of 133MHz, RF synthesizer is able to reali133MHze high efficiency. The supply current of 330mA needs to be provided to fully play clock generator's function. Input data is combined with clock logic function Buffer in this clock generator.
NB3N1200KMNG Features
Available in the 64-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
NB3N1200KMNG Applications
There are a lot of ON Semiconductor NB3N1200KMNG Clock Generators applications.
- Smartphones
- Frequency synthesis
- Multiplexing communication
- Bluetooth transmitters
- Clock synchronization
- Satellite receivers
- Signal demodulation
- Cable television converter boxes
- Skew suppression
- Coherent carrier tracking
