NB3N3002DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NB3N3002 |
| Output | HCSL, LVDS |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Nominal Supply Current | 95mA |
| Max Supply Current | 95mA |
| Frequency (Max) | 200MHz |
| Halogen Free | Halogen Free |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:1 |
| Primary Clock/Crystal Frequency-Nom | 25MHz |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Height | 1.2mm |
| Length | 5.1mm |
| Width | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NB3N3002DTG Overview
As a clock IC, PLLs is packaged using the Tube method. The 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result of this, we can find 16 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. As the Clock PLL's input, Clock, Crystal is designed to be used in order to generate the clock signal. There is a maximum frequency of 200MHz Max with this clock-based frequency generator. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock generator ic works with 3.135V~3.465V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. The frequency synthesizer in this product is compatible with all levels of HCSL, LVDS logic. This electronic component is usually classified as a Clock Generator component. In particular, this clock PLL is designed to be used with microprocessors. The related electronic parts of part number NB3N3002 are listed below. There are 16 pins on the frequency generator that are available for use. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. Using a frequency of 25MHz allows frequency synthesizer to achieve high efficiencies. I have designed a clock PLL with 1 elements and low jitter performance. The maximal current supplied for phase locked loop's operation reaches 95mA.
NB3N3002DTG Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
NB3N3002DTG Applications
There are a lot of ON Semiconductor NB3N3002DTG Clock Generators applications.
- Line cards used in telephone exchange
- Main oscillator in receiver
- Pulsed digital systems
- Microwave point-to-point systems
- Myriad digital applications
- CB radios
- Precision auxiliary angle deflection measurement
- Radar
- Carrier synchronization in wired communication
- Microprocessor clock multipliers
