NB3N3011DTG
| Parameters | |
|---|---|
| Max Supply Current | 31mA |
| Frequency (Max) | 120MHz |
| Input | Crystal |
| Ratio - Input:Output | 1:1 |
| Primary Clock/Crystal Frequency-Nom | 25MHz |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | Yes/No |
| Duty Cycle | 52 % |
| Height | 950μm |
| Length | 3.1mm |
| Width | 4.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | PureEdge™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Frequency | 106.25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NB3N3011 |
| Output | LVPECL |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 31mA |
NB3N3011DTG Overview
Clock generator is packaged in the way of Tube. There is a clock generator embedded in the 8-TSSOP (0.173, 4.40mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of NOT SPECIFIED. As a result, frequency synthesizers can be found to contain 8 terminations. This time clock generator should be voltaged at 3.3V. In this clock generator, Crystal is used as the input to the clock. RF synthesizers based on this clock provide frequencies up to 120MHz maximum. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. There are 3.135V~3.465V different supply voltages that can be provided for this RF synthesizer. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. LVPECL logic levels are supported by this RF synthesizer. This electronic component can be classified into Clock Generator. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. This part number NB3N3011 is related to the following electrical components. There are 8 pins that are available on the frequency generator. In terms of the supply voltage, analog clock generator can handle 3.3V volts. An electronic part belonging to the PureEdge? series is being used here. Clock PLL is configured with 1 output. By operating at a frequency of 106.25MHz, frequency generator is able to achieve high efficiency. During this clock generator operation, a maximum current of 31mA is supplied.
NB3N3011DTG Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
NB3N3011DTG Applications
There are a lot of ON Semiconductor NB3N3011DTG Clock Generators applications.
- Threshold extension
- Multi-function printers
- Instrument
- Signal demodulation
- Signal modulation and demodulation
- CB radios
- Coherent detection of the signal
- Frequency shifting decodes
- Time to digital converters
- Satellite navigation communication
