banner_page

NB3N51032DTG

3.3V Clock Generator Clock Generators 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 3.135V~3.465V Tube


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NB3N51032DTG
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 347
  • Description: 3.3V Clock Generator Clock Generators 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 3.135V~3.465V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 172.98879mg
Operating Temperature -40°C~85°C
Packaging Tube
Published 2006
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Clock Generator
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology CMOS
Voltage - Supply 3.135V~3.465V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 200MHz
Output HCSL, LVDS
Number of Outputs 2
Power Supplies 3.3V
Number of Circuits 1
Operating Supply Current 100mA
Max Supply Current 100mA
Input Clock, Crystal
Ratio - Input:Output 1:2
Primary Clock/Crystal Frequency-Nom 25MHz
PLL Yes
Differential - Input:Output No/Yes
Max Duty Cycle 55 %
Divider/Multiplier Yes/No
Height 1.05mm
Length 5.1mm
Width 4.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NB3N51032DTG Overview


Clock generator is packaged in the way of Tube. The 16-TSSOP (0.173, 4.40mm Width) package includes this clock generator. 16 terminations can be found in frequency generators. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. In this case, Clock, Crystal is designed to be the input of the clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. As long as there are 3.135V~3.465V supply voltages provided, clock generator ic should work. Based on test statistics, ambient temperature should be set at -40°C~85°C. The RF synthesizer is compatible with HCSL, LVDS logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator component. There are 16 pins on the frequency generator that are available for use. The output frequency can be magnified as high as possible with the assistance of 2 signal outputs. Frequency generator is able to reali200MHze high efficiency when operating at a frequency of 200MHz. To fully perform its function, time clock generator requires a supply current of 100mA. This RF synthesizer operation requires a maximum current of 100mA.

NB3N51032DTG Features


Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V

NB3N51032DTG Applications


There are a lot of ON Semiconductor NB3N51032DTG Clock Generators applications.

  • Microwave point-to-point systems
  • Aerospace and defense
  • Pagers
  • Automatic control system test
  • Cable television converter boxes
  • Mixed mode (analog and digital) applications
  • Cell phones
  • Bit synchronization
  • Reference signals to RF systems
  • Melting

Write a review

Note: HTML is not translated!
    Bad           Good