NB3N5573DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NB3N5573 |
| Output | HCSL |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 120mA |
| Max Supply Current | 135mA |
| Halogen Free | Halogen Free |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:2 |
| Primary Clock/Crystal Frequency-Nom | 25MHz |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | Yes/No |
| Duty Cycle | 50 % |
| Ambient Temperature Range High | 85°C |
| Height | 1.2mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NB3N5573DTG Overview
The Tube method is used for packaging clock ICs. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. There are a total of 16 terminations in this file. This time clock generator should be voltaged at 3.3V. The input of this clock generator is designed to be Clock, Crystal. 1 circuits are implemented to access the electronic component's full performance. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. There are 2.97V~3.63V available for use with this clock PLL. The temperature should be set at -40°C~85°C to ensure reliable performance. It's compatible with HCSL logic levels. This is an electronic part that can be classified as a Clock Generator in this case. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. According to the base part number, its related parts can be founded. It is possible to connect to the frequency generators via 16 pins. Supply voltage 3.3V is what clock generator can handle. The output frequency can be magnified as high as possible with the assistance of 2 signal outputs. At a frequency of 200MHz, frequency generator is capable of achieving high efficiency. The maximal current supplied for phase locked loop's operation reaches 135mA.
NB3N5573DTG Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
NB3N5573DTG Applications
There are a lot of ON Semiconductor NB3N5573DTG Clock Generators applications.
- FPGA and processor clocks
- Cellular/4G
- Bluetooth transmitters
- Automatic control
- Mobile telephones
- Radar
- VSAT (Small Ground Satellite Station)
- Skew suppression
- Radio receivers
- Infotainment systems
