NB4N840MMNR4G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Type | Crosspoint Switch |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4N840 |
| Output | SEPARATE OUTPUT |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Circuit | 2 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Throw Configuration | DPDT |
| Data Rate | 2.7 Gbps |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| On-State Resistance (Max) | 57.5Ohm |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Switch-on Time-Max | 0.135ns |
| Switch-off Time-Max | 0.135ns |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NB4N840MMNR4G Overview
As a means of saving space, digital switch is provided in the 32-VFQFN Exposed Pad.Tape & Reel (TR) represents its packaging.Surface Mount is the mounting method digital switch ic uses.Crosspoint Switch is the analog IC that the multiplexers uses.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 3V~3.6V, designers have greater flexibility of digital controlled switch.There are 32 terminations included in its basic configuration.The base part number is 4N840, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 3.3V is supplied.This turn signal switch has 32 component pins.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 32 pins.The mounting is in the way of Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 3V so that unnecessary failures can be prevented.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In electronic terms, the digital switch ic is classified as part number Multiplexer or Switches.Reliable performance of the multiplexers can be achieved when a supply voltage of 3.3V is provided.This turn signal switch's circuit is based on a circuit with 2 channels.
NB4N840MMNR4G Features
Supplied in the 32-VFQFN Exposed Pad package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
NB4N840MMNR4G Applications
There are a lot of ON Semiconductor NB4N840MMNR4G Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Make half adder
- Data communication
- High-performance memory systems
- Enabling block of memory depending on address in memory chips
- Electronics industry
- Logic gates for other digital devices
- Medium scale TV wall
- Automation system
- PCIe
