NB6L239MNG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | ECLinPS MAX™ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Divider |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Technology | ECL |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 3GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NB6L239 |
| Output | LVPECL |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Number of Circuits | 1 |
| Nominal Supply Current | 40mA |
| Propagation Delay | 600 ps |
| Turn On Delay Time | 600 ps |
| Family | 6L |
| Logic Function | Clock |
| Number of Inputs | 2 |
| Halogen Free | Halogen Free |
| Input | CML, HSTL, LVDS, LVPECL |
| Ratio - Input:Output | 1:2 |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Prop. Delay@Nom-Sup | 0.6 ns |
| Divider/Multiplier | Yes/No |
| fmax-Min | 3000 MHz |
| Same Edge Skew-Max (tskwd) | 0.03 ns |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NB6L239MNG Overview
As a clock IC, it uses the Tube package. Embedded in the 16-VFQFN Exposed Pad package is this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are 16 terminations found in the file. A voltage of 2.5V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be CML, HSTL, LVDS, LVPECL. Using 1 circuits, the electronic part's full performance can be accessed. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock PLL is capable of receiving a maximum of 3.465V as a supply voltage. Clock generators should operate with the voltage supply of 2.375V~3.465V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. As the name suggests, this is a clock generator that is compatible with LVPECL logic levels. This electronic component can be classified as a Clock Divider. It is a 16-bit clock PLL designed specifically for microprocessors. This part number is related to its related electronic parts. There is an available 16 pin on the clock generators. Time clock generator can handle a voltage of 3.3V as the supply voltage. This electronic part is a member of the ECLinPS MAX? series. There is a low timing skew at 0.03 nsmax with this RF synthesizer. You can find similar clock generators by searching for the 6L family. At 3GHz, frequency synthesizer achieves high efficiency. The frequency synthesizer combines clock logic function Clock with input data. With this time clock generator, you get 2 inputs.
NB6L239MNG Features
Available in the 16-VFQFN Exposed Pad
Supply voltage of 2.5V
Operating supply voltage of 3.3V
NB6L239MNG Applications
There are a lot of ON Semiconductor NB6L239MNG Clock Generators applications.
- Ultrasound diagnosis
- Frequency shifting decodes
- Signal modulation and demodulation
- Bluetooth transmitters
- Bluetooth receivers
- Cellular/4G
- Pagers
- 10 Gigabit Ethernet
- Mixed mode (analog and digital) applications
- Carrier synchronization in wired communication
