NB6N239SMNG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | ECLinPS MAX™ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Divider |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Voltage - Supply | 3V~3.465V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 3GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NB6N239S |
| Output | LVDS |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Propagation Delay | 780 ps |
| Quiescent Current | 55mA |
| Family | 6N |
| Logic Function | Clock |
| Halogen Free | Halogen Free |
| Input | CML, HSTL, LVDS, LVPECL |
| Ratio - Input:Output | 1:2 |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Prop. Delay@Nom-Sup | 0.78 ns |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.03 ns |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NB6N239SMNG Overview
It is packaged using the Tube method since it is a clock IC. The 16-VFQFN Exposed Pad package embeds this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As a result of this, we can find 16 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be CML, HSTL, LVDS, LVPECL. A total of 1 circuits are implemented to access the full performance of the electrical part. This component can be conveniently installed on the panel thanks to the Surface Mount. Approximately 3.465V is the maximum supply voltage needed by this time clock generator. This frequency synthesizer requires a supply voltage above 3V to be safe. Clock PLL works with 3V~3.465V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. A frequency synthesizer which is compatible with the LVDS logic levels is presented here. As far as electrical parts go, this component can be classified as a Clock Divider component. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. NB6N239S is the base part number for finding related electronic parts. The clock PLL has 16 pins that are available. This time clock generator can handle a voltage of 3.3V as its supply voltage. There are a number of electronic parts in the ECLinPS MAX? series, including this one. The output frequency can be magnified as high as possible with the assistance of 2 signal outputs. At maximum 0.03 ns, this analog clock generator has low timing skew. A search for the 6N family will yield similar electronic components. At a frequency of 3GHz, frequency generator is capable of achieving high efficiency. The frequency synthesizer combines clock logic function Clock with input data.
NB6N239SMNG Features
Available in the 16-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
NB6N239SMNG Applications
There are a lot of ON Semiconductor NB6N239SMNG Clock Generators applications.
- Communication infrastructure
- Coherent detection of the signal
- Ultrasound diagnosis
- Media broadcast servers
- Signal analyzer
- Microwave point-to-point systems
- Bluetooth transmitters
- Wireless handsets
- Frequency Modulation (FM) stereo decoders
- Smartphones
