banner_page

NBXDPA017LN1TAG

3.3V Oscillator, Crystal Programmable Timers PureEdge? Series NBXDPA017 6 Pins 156.25MHz 312.5MHz 3.3V 6-CLCC


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NBXDPA017LN1TAG
  • Package: 6-CLCC
  • Datasheet: PDF
  • Stock: 276
  • Description: 3.3V Oscillator, Crystal Programmable Timers PureEdge? Series NBXDPA017 6 Pins 156.25MHz 312.5MHz 3.3V 6-CLCC (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-CLCC
Number of Pins 6
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2010
Series PureEdge™
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Termination SMD/SMT
Type Oscillator, Crystal
Additional Feature VOLTAGE 2.5 AND FREQ 312.5 MHZ POSSIBLE; TRI-STATE; E/D FUNCTION; DIFFERENTIAL O/P; TAPE AND REEL
Subcategory Other Oscillators
Voltage - Supply 2.375V~3.63V
Supply Voltage 3.3V
Depth 5mm
Frequency 156.25MHz 312.5MHz
Frequency Stability 50 ppm
Base Part Number NBXDPA017
Pin Count 6
Physical Dimension 7.0mm x 5.0mm x 1.9mm
Operating Frequency 156.25MHz
Operating Supply Voltage 3.3V
Rise Time-Max 0.4ns
Fall Time-Max 0.4ns
Symmetry-Max 52/48%
Operating Supply Current 85mA
Supply Current-Max 105mA
Halogen Free Halogen Free
Output Load 100 OHM
Length 7mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

NBXDPA017LN1TAG Overview


The timer clock is suitable for 6-CLCC package. 156.25MHz 312.5MHz sets the frequency of the programmable timer.It is used to pack in Tape & Reel (TR) case. It is recommended that you mount your device using type Surface Mount.By using a programmable timer, a voltage of 2.375V~3.63V can be supplied to the circuit.The type of chips can be divided into Oscillator, Crystal. The operating temperature of this timer clock is -40°C~85°C. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 85mA voltage. The PureEdge? relates to the digital timer's series. It is based on NBXDPA017. The timer clock contains 6 pins. The digital timer's operating supply voltage is rated 3.3V voltage. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: VOLTAGE 2.5 AND FREQ 312.5 MHZ POSSIBLE; TRI-STATE; E/D FUNCTION; DIFFERENTIAL O/P; TAPE AND REEL. On operating frequency, it's available in the range of 156.25MHz. The sum of the IC chip pins is 6 . The number of the chip's terminations sums up to 6. Its subcategory belongs to Other Oscillators.

NBXDPA017LN1TAG Features


Operate frequency at 156.25MHz 312.5MHz
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Additional Feature: VOLTAGE 2.5 AND FREQ 312.5 MHZ POSSIBLE; TRI-STATE; E/D FUNCTION; DIFFERENTIAL O/P; TAPE AND REEL

NBXDPA017LN1TAG Applications


There are a lot of ON Semiconductor NBXDPA017LN1TAG Programmable Timers & Oscillators applications.

  • Clutch Actuator circuit
  • Delay circuits
  • Battery Powered Systems
  • Energy Harvesting Systems
  • Intruder Detection
  • Consumer Electronics
  • Tamper Detection
  • Smart Key
  • Sensor Node
  • Remote Sensors

Write a review

Note: HTML is not translated!
    Bad           Good