NC7SB3157P6X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Base Part Number | 7SB3157 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 180mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 23 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 250MHz |
| Turn-Off Delay Time | 12.5 ns |
| On-State Resistance (Max) | 15Ohm |
| High Level Output Current | 128mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6.5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.2ns, 3.5ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 7ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 7Ohm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SB3157P6X Overview
Shipping overseas is convenient due to the electrical component's packing in 6-TSSOP, SC-88, SOT-363. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 6 terminations. The electronic part provides high-quality output because it has 1 channels. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. A SPDT switching circuit is used for these analog switches. It consists of 1 circuits. Using the 7SB3157 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 50Ohm. To find out what the functions of 6 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Single supply type digital switch with a low cost. It is recommended to use 1.65V as the lowest voltage for the electrical part. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. A digital multiplexer may suffer damage if voltage is applied above 1μA. Among the inputs that can be operated are the 2 inputs. The data can be transferred over a wide range of bandwidths, called 250MHz bandwidths. Resistivity from Drain to Source is 7Ohm for this electronic part.
NC7SB3157P6X Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 250MHz
Drain-to-Source resistance: 7Ohm
NC7SB3157P6X Applications
There are a lot of ON Semiconductor NC7SB3157P6X Analog Switches & Multiplexers ICs applications.
- Cable PC
- Avionics test equipment
- Isolation
- ATM
- Access Concentrators
- Microprocessor controlled systems
- DSLAMs
- USB 1.1 signal switching circuits
- Sample hold systems
- Communication systems
