NC7SB3157P6X-F40
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Weight | 28.009329mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 15Ohm |
| Max Power Dissipation | 180mW |
| Base Part Number | 7SB3157 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Max Supply Current | 1μA |
| Turn On Delay Time | 5.2 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 3.5 ns |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6.5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.2ns, 3.5ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -54dB @ 10MHz |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| RoHS Status | RoHS Compliant |
NC7SB3157P6X-F40 Overview
Shipping overseas is convenient due to the electrical component's packing in 6-TSSOP, SC-88, SOT-363. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Around -40°C~85°C TA is the extended operating temperature. The analog switch ics are built using SPDT switching circuits. The circuits in this analogue multiplexer number 1. Try searching for 7SB3157 variants of the analog switch ic. The internal resistance of this digital multiplexer is 15Ohm. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage the electrical component should receive. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur.
NC7SB3157P6X-F40 Features
Switch Circuit: SPDT
-3db Bandwidth: 250MHz
NC7SB3157P6X-F40 Applications
There are a lot of ON Semiconductor NC7SB3157P6X-F40 Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- SDH/SONET multiplexers
- Optical Applications
- Cellular phones
- 65 V DACs
- PCMCIA cards
- Automatic test equipment
- Industrial and process control systems
- MP3 players
