NC7SBU3157P6X

5.2ns, 3.5ns SPDT 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 7SBU3157 100nA 2.3V 6-TSSOP, SC-88, SOT-363

Manufacturer: ON Semiconductor
Nocochips NO: 598-NC7SBU3157P6X
Package: 6-TSSOP, SC-88, SOT-363
Datasheet: -
Stock: 174
Description: 5.2ns, 3.5ns SPDT 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 7SBU3157 100nA 2.3V 6-TSSOP, SC-88, SOT-363(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-TSSOP, SC-88, SOT-363
Number of Pins	6
Weight	28mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	15Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	180mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	2.3V
Base Part Number	7SBU3157
Number of Outputs	2
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Nominal Supply Current	128mA
Power Dissipation	180mW
Max Supply Current	1μA
Turn On Delay Time	23 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	250MHz
Turn-Off Delay Time	12.5 ns
On-State Resistance (Max)	15Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	57 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	6.5pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	5.2ns, 3.5ns
Charge Injection	7pC
Channel-to-Channel Matching (ΔRon)	150m Ω
Crosstalk	-54dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	7ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	3Ohm
Height	1mm
Length	2mm
Width	1.25mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

NC7SBU3157P6X Overview

As the electronic part is packed in 6-TSSOP, SC-88, SOT-363, international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. Total terminations are 6. A high-quality output is provided by the electrical component's 2 channels. A 2.3V voltage supply should turn on and run the electronic component. On the other hand, analog switches can be constructed using SPDT switching circuits. Look for analog switch ic variants by searching with 7SBU3157. As far as internal resistance is concerned, it has 15Ohm. You can find the functions of the 6 pins in the datasheets. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 1.65V. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. Putting voltage greater than 1μA on the multiplexer may cause damage. Among the inputs that can be operated are the 1 inputs. 250MHz bandwidths enable data to be transferred. Drain to Source resistance for this electronic component is 3Ohm. In this digital multiplexer, there are 2 outputs.