NC7SP157P6X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 7SP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.9V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Base Part Number | 7SP157 |
| Number of Outputs | 1 |
| Circuit | 1 x 2:1 |
| Supply Voltage-Min (Vsup) | 0.9V |
| Load Capacitance | 30pF |
| Throw Configuration | DPST |
| Propagation Delay | 14.1 ns |
| Family | P |
| Current - Output High, Low | 2.6mA 2.6mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Max I(ol) | 0.0005 A |
| Prop. Delay@Nom-Sup | 47.7 ns |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Height | 900μm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SP157P6X Overview
It is included in the 6-TSSOP, SC-88, SOT-363 in order to save board space.The package is packaged in accordance with Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 0.9V~3.6V provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 7SP series.The basic configuration of this system includes 6 terminations.To find signal switch's related components, a base part number of 7SP157 may also be used.For multiplexer's system, a voltage of 1.2V is supplied.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Single that is employed in this case.Currently, it is configured with a 6 pin configuration.This unit is mounted in the way of Surface Mount.The logic switch belongs to the family of P.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 0.9V.The turn signal switch has 1 outputs.The switches packaging is based on TAPE AND REEL.As a voltage level input, the multiplexers have 2 lines.
NC7SP157P6X Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
2 input lines
NC7SP157P6X Applications
There are a lot of ON Semiconductor NC7SP157P6X Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- Electronics industry
- Make half adder
- Analog to digital conversion
- Image transmission
- Transmission from the computer system of a satellite
- Combinational circuit
- Code conversion
- Telephone network
- War field flying robot with a night vision flying camera
