banner_page

NC7SP158L6X

6 Terminations0.9V~3.6V Signal switch7SP Series 1 Outputs1 Functions


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-NC7SP158L6X
  • Package: 6-UFDFN
  • Datasheet: PDF
  • Stock: 938
  • Description: 6 Terminations0.9V~3.6V Signal switch7SP Series 1 Outputs1 Functions(Kg)

Details

Tags

Parameters
JESD-30 Code R-XDSO-N6
Number of Outputs 1
Qualification Status COMMERCIAL
Circuit 1 x 2:1
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 0.9V
Family P
Number of Inputs 2
Current - Output High, Low 2.6mA 2.6mA
Output Polarity INVERTED
Propagation Delay (tpd) 47.7 ns
Voltage Supply Source Single Supply
Independent Circuits 1
Height Seated (Max) 0.55mm
RoHS Status ROHS3 Compliant
Mounting Type Surface Mount
Package / Case 6-UFDFN
Surface Mount YES
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 7SP
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Type Multiplexer
Terminal Finish NICKEL GOLD
Technology CMOS
Voltage - Supply 0.9V~3.6V
Terminal Position DUAL
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.2V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 6

NC7SP158L6X Overview


In order to save board space, digital switch is located in the 6-UFDFN.It is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The analog IC in the multiplexers is identified as Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When digital controlled switch operates at 0.9V~3.6V, designers are provided with a greater degree of flexibility.Several applications are possible for 7SP series multiplexers.It is designed with 6 terminations as part of its basic configuration.The multiplexer's system is powered by 1.2V voltage.A component pin count of 6 can be found on this turn signal switch.As a result, conductors end at NO LEAD.Among the family of P the logic switch is a member.The minimal supply voltage (Vsup) should be kept at 0.9V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.There are 1 outputs designed for the operation of the turn signal switch.In this multiplexer, there is a total of 2 inputs.

NC7SP158L6X Features


Supplied in the 6-UFDFN package

NC7SP158L6X Applications


There are a lot of Rochester Electronics, LLC NC7SP158L6X Signal Switches / Multiplexers / Decoders applications.

  • LVDS
  • Speed synchronization of multiple motors in industries
  • Enabling different rows of memory depending on address in memory chips
  • Telephone network
  • To select different devices in microprocessor input
  • Microprocessor input/output systems
  • Analog to digital conversion
  • Implementing boolean functions with multiple variables
  • Make full adder
  • Enabling block of memory depending on address in memory chips

Write a review

Note: HTML is not translated!
    Bad           Good