Parameters |
Type |
Decoder/Demultiplexer |
Terminal Finish |
Gold/Nickel (Au/Ni) |
Subcategory |
Decoder/Drivers |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
0.9V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
1.2V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
7SP19 |
Number of Outputs |
2 |
Qualification Status |
Not Qualified |
Circuit |
1 x 1:2 |
Polarity |
Non-Inverting |
Supply Voltage-Min (Vsup) |
0.9V |
Load Capacitance |
30pF |
Throw Configuration |
DPST |
Propagation Delay |
48.3 ns |
Quiescent Current |
900nA |
Turn On Delay Time |
48.3 ns |
Family |
P |
Logic Function |
Decoder, Demultiplexer |
Current - Output High, Low |
2.6mA 2.6mA |
Supply Type |
Single |
Max I(ol) |
0.0005 A |
Number of Input Lines |
1 |
Voltage Supply Source |
Single Supply |
Input Conditioning |
STANDARD |
Height Seated (Max) |
0.55mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-UFDFN |
Number of Pins |
6 |
Weight |
18mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2016 |
Series |
7SP |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
NC7SP19L6X Overview
This is a relatively small item of digital switch that is included in the 6-UFDFN in order to save space on the board.In this case, it is packaged as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When operated with a 0.9V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 7SP series.Its basic configuration includes terminations in the 6 range.The base part number is 7SP19, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 1.2V is supplied.As a result, NO LEAD represents the end of the conductors.In this case, Single is employed as the supply type.Currently, it is configured with a 6 pin configuration.Surface Mount is the way it is mounted.Among the family of P the logic switch is a member.The minimal supply voltage (Vsup) should be kept at 0.9V to avoid some unnecessary failures.The turn signal switch has 2 outputs designed for operation.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.No external influence consumes 900nA current of multiplexer ic.A TAPE AND REEL packaging method is used in the switches.As a voltage level input, the multiplexers have 1 lines.
NC7SP19L6X Features
Supplied in the 6-UFDFN package
Adopting a supply type of Single
1 input lines
NC7SP19L6X Applications
There are a lot of ON Semiconductor NC7SP19L6X Signal Switches / Multiplexers / Decoders applications.
- A/D converters
- Make full adder
- Memory chips
- Electronically controlled engine system
- Recording transmission
- Enabling different functions units in microprocessor instruction decoding
- Code converters
- Data-routing applications
- Injectors
- Arithmetic Logic Units