NC7SP19P6X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 7SP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.9V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Base Part Number | 7SP19 |
| Number of Outputs | 2 |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.9V |
| Load Capacitance | 30pF |
| Throw Configuration | DPST |
| Propagation Delay | 48.3 ns |
| Quiescent Current | 900nA |
| Turn On Delay Time | 48.3 ns |
| Family | P |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 2.6mA 2.6mA |
| Supply Type | Single |
| Max I(ol) | 0.0005 A |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SP19P6X Overview
For the purpose of saving board space, digital switch is included in the 6-TSSOP, SC-88, SOT-363.Tape & Reel (TR) is the method used for packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 0.9V~3.6V, designers are provided with a greater degree of flexibility.Several applications are possible for 7SP series multiplexers.As part of its basic configuration, 6 terminations are designed as a part of it.As its base part number is 7SP19, logic switch can also be used to find its related parts.For multiplexer's system, a voltage of 1.2V is supplied.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.A total of 6 pins are configured on this board.This unit is mounted in the way of Surface Mount.The logic switch is a member of the P family.The minimal supply voltage (Vsup) should be kept at 0.9V to avoid some unnecessary failures.As part of the operation of this turn signal switch, there are 2 outputs.The part belongs to the Decoder/Drivers category of signal switches.There are no external influences on this multiplexer ic, so it consumes 900nA current.According to TAPE AND REEL, the switches is packaged.On the multiplexers, 1 input lines are provided for accepting voltage levels.
NC7SP19P6X Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
1 input lines
NC7SP19P6X Applications
There are a lot of ON Semiconductor NC7SP19P6X Signal Switches / Multiplexers / Decoders applications.
- Automation system
- Code converters
- A/D converters
- Logic circuits
- Enabling different rows of memory depending on address in memory chips
- Metal detectors
- Transmission from the computer system of a satellite
- Data demultiplexing
- RF-based home automation system
- Memory chips
