NC7SP74L8X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Number of Pins | 8 |
| Weight | 25mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 7SP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.9V~3.6V |
| Terminal Position | QUAD |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 7SP74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.9V |
| Number of Channels | 1 |
| Load Capacitance | 30pF |
| Number of Bits | 1 |
| Clock Frequency | 150MHz |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 24 ns |
| Family | P |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 900nA |
| Current - Output High, Low | 2.6mA 2.6mA |
| Max I(ol) | 0.0005 A |
| Max Propagation Delay @ V, Max CL | 8ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SP74L8X Overview
8-UFQFNis the packaging method. It is included in the package Tape & Reel (TR). This output is configured with Differential. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. Powered by a 0.9V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. It belongs to the type D-Typeof flip flops. It belongs to the 7SPseries of FPGAs. You should not exceed 150MHzin the output frequency of the device. There is 900nA quiescent consumption. It has been determined that there have been 8 terminations. You can search similar parts based on 7SP74. A voltage of 1.2V is used to power it. JK flip flop input capacitance is 2pF farads. It belongs to the family of electronic devices known as P. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 8 pins. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 1bits in its design. There is a 3.6Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 0.9V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 1 channels are available.
NC7SP74L8X Features
Tape & Reel (TR) package
7SP series
8 pins
1 Bits
NC7SP74L8X Applications
There are a lot of ON Semiconductor NC7SP74L8X Flip Flops applications.
- Latch
- Latch-up performance
- Bounce elimination switch
- Load Control
- Memory
- Modulo – n – counter
- Computing
- Buffer registers
- Event Detectors
- Safety Clamp
