NC7SV19L6X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 18mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 7SV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Gold/Nickel (Au/Ni) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.9V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7SV19 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.9V |
| Throw Configuration | DPST |
| Propagation Delay | 18.8 ns |
| Quiescent Current | 900nA |
| Turn On Delay Time | 18.8 ns |
| Family | AUP/ULP/V |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SV19L6X Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 6-UFDFN.It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.The turn signal switch is designed for use with a 0.9V~3.6V supply voltage, which gives it a lot of flexibility.With the 7SV series, the multiplexers are suitable for a diverse range of applications.The basic configuration includes 6 terminations.There is a base part number 7SV19 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 1.2V voltage.A conductor terminates at NO LEAD.Single is employed as its supply type.It is configured with 6 pins.The mounting point is Surface Mount.The logic switch belongs to the family of AUP/ULP/V.The minimal supply voltage (Vsup) should be kept at 0.9V to avoid some unnecessary failures.The turn signal switch has 2 outputs designed for operation.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.In the absence of external influences, it consumes 900nA current of multiplexer ic.The switches package is packaged in accordance with TAPE AND REEL.On the multiplexers, 1 input lines are provided for accepting voltage levels.
NC7SV19L6X Features
Supplied in the 6-UFDFN package
Adopting a supply type of Single
1 input lines
NC7SV19L6X Applications
There are a lot of ON Semiconductor NC7SV19L6X Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Night vision cameras
- Communication system
- Memory chips
- RF-based home automation system
- Combinational circuit
- High-performance memory systems
- Metal detectors
- Used to connect a single source to multiple destinations
- Code converters
