NC7SV74K8X
| Parameters | |
|---|---|
| Length | 2.1mm |
| Width | 2.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 7SV |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.9V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | 7SV74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.9V |
| Number of Channels | 1 |
| Load Capacitance | 30pF |
| Output Current | 24mA |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 13 ns |
| Family | AUP/ULP/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 900μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.002 A |
| Max Propagation Delay @ V, Max CL | 2.8ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 800μm |
NC7SV74K8X Overview
The flip flop is packaged in 8-VFSOP (0.091, 2.30mm Width). You can find it in the Tape & Reel (TR)package. Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates with an input voltage of 0.9V~3.6V volts. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 7SV series. It should not exceed 200MHzin terms of its output frequency. As a result, it consumes 900μA of quiescent current without being affected by external factors. The number of terminations is 8. You can search similar parts based on 7SV74. A 2pFfarad input capacitance is provided by this T flip flop. AUP/ULP/Vis the family of this D flip flop. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part with 1bits has been designed. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). Normal operation requires a supply voltage (Vsup) above 0.9V. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. With an output current of 24mA, this device offers maximum design flexibility. In terms of quiescent current, it consumes 1μA . Currently, there are 1 channels available.
NC7SV74K8X Features
Tape & Reel (TR) package
7SV series
8 pins
1 Bits
NC7SV74K8X Applications
There are a lot of ON Semiconductor NC7SV74K8X Flip Flops applications.
- Individual Asynchronous Resets
- Storage registers
- Instrumentation
- Parallel data storage
- Frequency division
- Balanced Propagation Delays
- Control circuits
- Balanced 24 mA output drivers
- Buffer registers
- Divide a clock signal by 2 or 4
