NC7SZ125P5X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Supplier Device Package | SC-70-5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 7SZ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 150mW |
| Voltage - Supply | 1.65V~5.5V |
| Base Part Number | 7SZ125 |
| Number of Outputs | 1 |
| Output Type | 3-State |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Number of Bits | 1 |
| Propagation Delay | 5 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 15.6 ns |
| Logic Function | Buffer, Inverting |
| Number of Inputs | 1 |
| Current - Output High, Low | 32mA 32mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 1 |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SZ125P5X Overview
Logical driver uses a neat 5-TSSOP, SC-70-5, SOT-353 package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 32mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 7SZ series devices. Buffer IC is suitable for Surface Mount applications. Logical driver has 5 pins. The bus transceiver employs 1 bits for each element. You can search "7SZ125" for other related electrical components. In quiescent state, the electronic part uses 2μA. 1 bits are included within the electrical component. 1 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 32mA to its low level. In high level output mode, the electronic parts may conduct -32mA of current. Voltage used to run voltage buffer should be 1.65V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. Wireless transceiver is able to output 1 lines. Because of its 1 lines level input capability, buffer IC is more cost-effective on transimitting signals. Supplier device package of this electronic part would be SC-70-5. It is sufficient to make 1 outputs. Digital buffer is characterized to have 1 inputs. The fundamental operation of logical driver is based on 1 circuits.
NC7SZ125P5X Features
High Level Output: 32mA
Low Level Output: -32mA
NC7SZ125P5X Applications
There are a lot of ON Semiconductor NC7SZ125P5X Buffers & Transceivers applications.
- Structural bonding
- Wireless HD Photography
- Bar, KTV wireless entertainment
- Wireless transmission
- Changeing the frequency from IF to RF
- Satellite communications networks
- Copper and fiber optic cables connection network
- Satellite communication
- Ethernet circuitry
- Wireless smart house
