NC7SZ175P6
| Parameters | |
|---|---|
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 1μA |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONSULT SALES OFFICE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 7SZ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Base Part Number | 7SZ175 |
| Function | Reset |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 175MHz |
| Propagation Delay | 16.5 ns |
| Turn On Delay Time | 9.8 ns |
NC7SZ175P6 Overview
The flip flop is packaged in a case of 6-TSSOP, SC-88, SOT-363. D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Non-Invertedas the output. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 1.65V~5.5V volts. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 7SZ series. A frequency of 175MHzshould be the maximum output frequency. As a result, it consumes 1μA quiescent current. Currently, there are 6 terminations. If you search by 7SZ175, you will find similar parts. Power is provided by a 1.8V supply. Input capacitance of this device is 3pF farads. The electronic device belongs to the LVC/LCX/Zfamily. Surface Mount mounts this electronic component. A total of 6pins are provided on this board. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. There are 1bits in its design. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Its flexibility is enhanced by 1 circuits. There are 3.3V power supplies attached to it. It offers maximum design flexibility with its output current of 32mA.
NC7SZ175P6 Features
Tape & Reel (TR) package
7SZ series
6 pins
1 Bits
3.3V power supplies
NC7SZ175P6 Applications
There are a lot of ON Semiconductor NC7SZ175P6 Flip Flops applications.
- Buffered Clock
- Count Modes
- Parallel data storage
- Load Control
- Divide a clock signal by 2 or 4
- Individual Asynchronous Resets
- Latch-up performance
- High Performance Logic for test systems
- Clock pulse
- Counters
