NC7SZ18L6X
| Parameters | |
|---|---|
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Power Dissipation | 180mW |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 12.5 ns |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 30g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 7SZ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Demultiplexer |
| Terminal Finish | Gold/Nickel (Au/Ni) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7SZ18 |
NC7SZ18L6X Overview
In order to save board space, digital switch is located in the 6-UFDFN.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Demultiplexer as the analog IC.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 1.65V~5.5V voltage.Multiplexers from the 7SZ series can be used in a wide range of applications.As parts of its basic configuration, 6 terminations are desgined.As its base part number is 7SZ18, logic switch can also be used to find its related parts.For multiplexer's system, 1.8V voltage is supplied.Conductors terminate at NO LEAD in this design.Single is used as its supply type.This multiplexer ic has 6 pins configured.Surface Mount is the way it is mounted.The logic switch belongs to the family of LVC/LCX/Z.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.For mux switch's normal operation, power supply 3.3V is provided.The turn signal switch has 2 outputs.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.It consumes 1μA current of multiplexer ic without external influences.The switches is packaged according to the way of TAPE AND REEL.Voltage levels are accepted through 1 input lines of multiplexers.
NC7SZ18L6X Features
Supplied in the 6-UFDFN package
Adopting a supply type of Single
Power supplies of 3.3V
1 input lines
NC7SZ18L6X Applications
There are a lot of ON Semiconductor NC7SZ18L6X Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- D/A converters
- Time division multiplexing system
- Electronic circuits
- Data distribution
- HD surveillance system
- Make half adder
- Implementing boolean functions with multiple variables
- Robotic vehicles
- Automatic health monitoring systems
