NC7SZ19P6X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 7SZ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | 7SZ19 |
| Number of Outputs | 2 |
| Number of Elements | 1 |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 180mW |
| Throw Configuration | DPST |
| Propagation Delay | 11 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 11 ns |
| Family | LVC/LCX/Z |
| Logic Function | Demultiplexer |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SZ19P6X Overview
Due to the fact that it is provided in the 6-TSSOP, SC-88, SOT-363, digital switch allows the board to be compacted.Tape & Reel (TR) is the packaging method.In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC Decoder/Demultiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Using a 1.65V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 7SZ series.The basic configuration of this system includes 6 terminations.To find signal switch's related components, a base part number of 7SZ19 may also be used.The multiplexer's system is powered by 1.8V volts.A conductor terminates at GULL WING.In this case, the supply type is Single.With 6 pins, it is configured.The mounting is in the way of Surface Mount.The logic switch is a member of the LVC/LCX/Z family.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.For mux switch's normal operation, power supply 3.3V is provided.As a result, the turn signal switch consists of 2 outputs.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 1μA current of multiplexer ic.The signal switching is packaged by TAPE AND REEL. Transmission is carried out over 2 channels in the turn signal switch's circuit.In the mux switch configuration, there are 1 elements.
NC7SZ19P6X Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
Power supplies of 3.3V
NC7SZ19P6X Applications
There are a lot of ON Semiconductor NC7SZ19P6X Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Medical industry
- Metal detectors
- Memory system of computers
- Enabling different functions units in microprocessor instruction decoding
- Data communication
- Microprocessor input/output systems
- Recording transmission
- Frequency multiplexing system
- Relay
